Cart ‎  ★   Login or register  ★   Contact  ★   Mobile Site
Made in the UK • UK shipping £2.50 • Worldwide shipping £4.50

Tuesday, 28 May 2019

Our product photos were looking a bit tired, and were also a bit small and cluttered. After much thought, we made the brave decision to go through each and every plug type and get nice, big, zoomable photos of them all. Which led us to think, why don't we go through each and every plug type, and see what else we can do with them.

We started with the Aberration plugs. We're doing this all alphabetically, you see, it was the only way to get some sort of order out of the chaos of new ideas that were seemingly flooding in from all over the place.

But I digress. Aberrations are now upgraded with even more shiny, and even more colourfulness now that they come in 7 different colour-shifting combos. The colours are as follows:
01: Purple with blue teal flash
02: Red with green orange flash
03: Magenta with rainbow flash
04: Blue with yellow green flash
05: Purple with rainbow flash
06: Orange with blue teal flash
07: Magenta with blue teal flash

You can find these gorgeous plugs in sizes 6mm / 2g up to 25mm / 1" over at our main custom shop at, or have a look at our Etsy listings. Fancy these in wood, glass, or titanium? Make a Special Order, and we'll see what we can do for you :)

Tuesday, 7 May 2019

New at Deep Ocean of RGB plugs. These are lovely little fellas; they're a gorgeous translucent red topped off with blue, green and teal iridescent faux dichroic flashes of colour. They're deep-set as well, so there's more colour-action going on than with the standard Ocean of RGB plugs.

They're very nice. Photos don't do them justice.

These have actually been a while in the making, as we could never get them quite right (all sorts of weird stuff, some ugly, happened when they cured, which ruined their super-prettiness). However, we don't like to be beaten by weird, ugly things that can happen during the manufacturing process, so we pushed on and I think we've won now.

Deep Ocean of RGB plugs are available now in sizes 8mm / 0g up to 25mm / 1", single or double flared, 316L surgical steel, titanium or wood. We might be able to do these in other colour combos as well, so give us a shout over at Special Orders for the custom plugs of your dreams.

Sunday, 28 April 2019

These customisable Heart-Eyed Skull ear weights / hangies have been a long time in the making. The inital batch was made up November 2018 (or thereabouts), with one pair being completed and listed, but things got in the way, or broke, or ran out, so the others were put on hold.

However! The heart skull weights are not on hold anymore, they're now listed in the shop (with the exception of the silver-toned aluminium ones, they're awaiting polishing). Each listing has diifferent configurations, just as a few examples of how you can customise them.

First up are the copper heart-eyed skull ear weights / hangies. These have rose-gold-plated hooks, and fit through thin-walled tunnels 6mm / 2g and over. You can wear these in naked piercings as well, but only for short periods. Weight of these is ~26g.

Next we have the brass and blue haematite heart-eyed skull ear weights / hangies. These have brass saddle spreader hooks, and are lovely and comfortable to wear. The flares on these saddles do verge on the very large side, so unless you have very stretchy ears you may be better off getting a smaller size.  These come in sizes (big) 8mm  / 0g and over and weight ~32g.

And finally (for now) the Madagascan labradorite dark-silver-toned heart-eyed skull ear weights / hangies. These have been cold cast in iron, and have stainless steel hooks. These can be worn in naked piercings for however long is comfortable, or through tunnels size 8mm / 0g and over, and weigh in ~29g. The labradorite has a nice bit of flash on it as well, which is always good.

Fancy something different? You can make a special order for custom ear plugs / ear weights with this handy form.

Heart-Eyed Skull Facts! The skulls used for these are based on the Love-Skull design by FP-Creator; you can find their original model on the Thingiverse. These particular ones were optimised for ear weight fabness in Blender and 3D Builder, then printed in resin before being moulded and cold-cast into the ones pictured.

Copper & Rose Gold Heart Skull Ear Weights / Hangies
Brass and Blue Haematite Heart Skull Saddle Ear Weights / Hangies
Labradorite & Dark Silver Iron Heart Skull Ear Weights / Hangies